MQTT-SN stands for “MQTT for Sensor Networks” which is aimed at embedded devices on non-TCP/IP networks, such as Zigbee. Its offical site says:
MQTT-SN is a publish/subscribe messaging protocol for wireless sensor networks (WSN), with the aim of extending the MQTT protocol beyond the reach of TCP/IP infrastructure for Sensor and Actuator solutions.
MQTT-SN specification can be downloaded from http://mqtt.org/new/wp-content/uploads/2009/06/MQTT-SN_spec_v1.2.pdf.
MQTT-SN vs MQTT¶
MQTT-SN looks similar to MQTT in most part, such as WILL message, such as Connect/Subscribe/Publish command.
The very difference between MQTT-SN and MQTT is the TopicId which replaces topic name in MQTT. TopicId is a 16 bits integer which stands for a topic name. Device and broker use REGISTER command to negotiate the mapping bewteen TopicId and topic name.
MQTT-SN is able to update Will message, even delete it. But MQTT is not allowed to change Will which is set in Connect command only.
MQTT-SN introduce gateways in its network. Gateway translate between MQTT-SN and MQTT, exchange messages between device and mqtt broker. And there is a mechanism that called gateway discovery, which enables device to find gateways automatically.
MQTT-SN support sleeping client feature which allows device to shutdown itself to save power for a while. Gateway need to buffer downlink publish message for sleeping devices, and push these message to devices once they are awake.
EMQ-SN is a EMQ plugin which implement most features of MQTT-SN. It serve as a MQTT-SN gateway on cloud, neighbor of EMQ broker.
mqtt.sn.port = 1884 mqtt.sn.advertise_duration = 900 mqtt.sn.gateway_id = 1 mqtt.sn.username = mqtt_sn_user mqtt.sn.password = abc
|mqtt.sn.port||The UDP port which emq-sn is listening on.|
|mqtt.sn.advertise_duration||The duration(seconds) that emq-sn broadcast ADVERTISE message through.|
|mqtt.sn.gateway_id||Gateway id in ADVERTISE message.|
|mqtt.sn.username||This parameter is optional. If specified, emq-sn will connect EMQTTD core with this username. It is useful if any auth plug-in is enabled.|
|mqtt.sn.password||This parameter is optional. Pair with username above.|
./bin/emqttd_ctl plugins load emq_sn